Guide the taper with gear the crew already owns
Smarter Cones, or Sequential Flares on the cones and drums already on the truck, give a directional wave so drivers know where to move.
Explore Smarter Cone
For the ops manager who has to win the DOT contract and keep it. Sequential lamps, flares, and cones are the gear your DOT will want to see on the job, built into what your crews already use, with no extra training.
Built for traffic control contractors and MOT fleets.
Sequential tapers sit alongside the arrow board the plan already calls for.
Guide drivers out of the closed lane sooner, on the cones and flares the crew already sets.
A clear path out of the closed lane before traffic reaches the crew.
Compass publishes the closure to a USDOT WZDx feed, and piLINK sends the temporary traffic control alert upstream.
Sequential lamps and flares first. Then piLINK and Compass put the closure on the map.
Smarter Cones, or Sequential Flares on the cones and drums already on the truck, give a directional wave so drivers know where to move.
Explore Smarter Cone
piLINK sends a connected-vehicle digital driver alert. A Compass marker publishes the closure to a USDOT WZDx feed. No tablet taps.
Explore piLINK Gateway
There is no extra sensor to place and nothing new to learn. Because the lamps, cones, and flares ride on gear the crew already sets, the setup is the one they actually use.
Explore Sequential Flares
Nightly lane drops, DOT and utility client jobs, and rental yards. The lamps, cones, and flares are the gear they already carry.
Smarter Cones and sequential flares guide drivers along the taper, alongside the arrow board the spec already calls for.
Compass marks the start and the end. pi-lit Cloud publishes a USDOT WZDx feed and piLINK sends the upstream driver alert.
Mounting for Type 3 barricades, drums, vertical panels, and 42-inch grabber cones, plus cone adapters for 28 in and 36 in cones.
MUTCD and ITE compliant Type A/C, Type B high-intensity, and Type D 360-degree lamps assembled in the USA.
piLINK digital driver alerts
Sequential taper lighting requirements vary from state to state. Compass start and end markers and piLINK sit on the barricades, drums, and cones the crew already deploys, alongside the arrow board the spec already calls for.

Sequential Barricade and Cone-Top Lamps, Compass GPS start/end markers, knockdown alerts, and Integrated Doppler Traffic Radar.

Complete 28-inch and 36-inch sequential cones that link automatically and send knockdown alerts when hit.

High-volume Type A/C, Type B, and Type D barricade lamps in 6V, D-cell alkaline, and solar power (formerly Checkers and C&C).

After-action reports, live knockdown notifications, upstream driver alerts, and the Customer & Integrator API.

Cone adapters for 28 in and 36 in cones, barricade bolt adapters, magnet bases, and 6-flare or 10-flare truck charging stations.

Rapid-deploy sequential road flares for shadow vehicles, flagger stations, and emergency short-duration lane closures.

Explore every pi-lit roadway safety product for connected warning, sequential guidance, and impact telemetry.
Request a quote for sequential lamps, flares, piLINK, and Compass.