Smarter Cone
An all-in-one sequential traffic cone that illuminates from within, links wirelessly as you set it down, and guides drivers out of closed lanes sooner.
The cone your crews already trust, with sequential guidance built inside.
Built inside a heavy-duty 28-inch or 36-inch JBC traffic cone, the Smarter Cone needs no clip-on lamps, no wiring, and no programming. Set the cones down along your taper and they link automatically into a moving wave of light that guides drivers into the open lane.
Product Videos
pi-lit builds smart safety devices that help crews warn earlier, guide drivers clearly, and monitor road assets from the cloud.
Key Benefits
Request a QuoteSynchronized sequential lighting
Six light patterns (four sequential waves, simultaneous flash, and steady burn). Change the pattern on one cone and the whole taper follows.
Built into a heavy-duty JBC cone
One-piece construction inside a standard 28-inch or 36-inch JBC cone (7 lb or 10 lb) with sealed electronics and no loose lamps to unclip.
Stack-and-charge up to 10 high
At the end of a shift, stack up to 10 Smarter Cones on a single charging base for a full recharge in 6 hours with zero cable clutter.
Automatic wireless sync
Cones link on their own over a 2.4 GHz network with up to 300 feet between cones. Turn them on in order and set them down.
Live map and knockdown alerts
Pair with piLINK to broadcast temporary traffic control alerts to navigation apps and text supervisors within 60 seconds if a cone is knocked over.
More than a passive cone.
A $20 orange cone does nothing until headlights hit its reflective collar inside the braking zone. A Smarter Cone taper actively moves traffic over sooner, stays lit all night, and alerts your crew when a cone is struck.
Drivers merge late when they can’t read a passive taper
Light travels cone to cone toward the open lane, so drivers read one clear merge direction from far upstream instead of guessing which side of the cones to pass.
More than half of fatal roadway crashes happen after dark
The whole cone body glows and sequences at road level, tracing the exact edge of the lane closure in the dark. Sequential patterns run 17+ to 53 hours on a charge (17+ hours in the wave pattern), keeping the taper bright through an entire night shift.
They cost more than a $20 cone because one cone does four jobs
It is the cone, the warning light, and the wireless sequencer in one unit. Pair with piLINK or the pi-lit app and it is also the monitor: live navigation alerts in driver navigation platforms and connected vehicles, knockdown alerts when a cone is hit, and battery status before a cone goes dark.
Sold in sets of 6 or 10, charger included.
Configured in the exact JBC cone height and weight your crews already run. Stack up to 10 cones on one base; 6-hour full recharge. Single replacement cones are available too.
SKU SC.G3.28.7.O.6RE. 28-inch 7 lb, 6-cone set, G3.
Features & Specifications

Features
- Cloud connectivity
- Optional, through piLINK or the pi-lit app. GPS position, remote on and off, and battery alerts, with mapping integration.
- Impact detection
- Built-in impact detection technology.
- Bluetooth remote control
- Run the line from your phone with the pi-lit app.
- Automatic sync
- Cones synchronize on their own. No programming: turn on and deploy.
- Sequence order
- The order you turn cones on sets the sequence. Both buttons reverse it.
- Flash patterns
- 6 patterns. Change the pattern on one cone and the whole line follows.
- Group off
- Hold power for 10 seconds on any cone to switch every cone off.
- Cone replacement
- A fresh cone takes a dead cone’s spot in the line automatically.
- Pair mode
- New cones switched on nearby join the running line.
Specifications
- Cone sizes
- 28-inch or 36-inch JBC cones, 7 lb or 10 lb
- Power
- Rechargeable lithium-ion battery
- Charging
- Charger included with each set of 6. Stack up to 10 cones to charge.
- Run time
- 7 to 53 hours on one charge, depending on flash pattern.
See run time by pattern
Run time by flash pattern, on one charge Pattern Run time Wave 17 h Rapid flash 30 h Strobe chase 22 h Wig-wag 53 h Simultaneous 10 h Steady burn 7 h There is no brightness setting, so the flash pattern sets the run time. Bench-tested at room temperature; cold weather shortens run time.
- Radio
- 2.4 GHz wireless between cones
Every set of Smarter Cones connects to pi-lit Cloud.
Your Smarter Cones connect to pi-lit Cloud through the pi-lit mobile app or a piLINK cellular gateway. Cloud access is included with every connected system.
- Live device status, with every connected device named by account and serial number
- Temporary traffic control alerts and events, logged the moment a deployment goes live
- Impact notifications when a connected device is struck or knocked down
- Reporting by date range for supervisors, directors and budget reviews
Safer tapers
Give your utility, DOT, or contracting crews an active, self-sequencing taper that guides traffic out of closed lanes sooner and charges in a single stack.
Request a Quote











