Smart Sequential Road Flares
Synchronized sequential lights that remove driver confusion, slow traffic down sooner, and guide vehicles safely past your crew.
Warning should do more than flash. It should guide.
A moving pattern of light points drivers exactly where to go, so they slow earlier, merge sooner, and give crews room to work.
Product Videos
pi-lit builds smart safety devices that help crews warn earlier, guide drivers clearly, and monitor road assets from the cloud.
Key Benefits
Shop The ProductFast setup
Turn them on and set them down; the flares link and sequence automatically in under 60 seconds.
Clear direction
A synchronized wave of light shows approaching drivers which lane to take before they reach your crew.
Built for the road
Weatherproof, crush-rated to 30,000 lbs, and built in the USA to survive heavy trucks and snowplows.
Reusable, not disposable
Rechargeable and alkaline kits run for years, replacing $30 plastic triangles and single-use flares.
Warns drivers ahead
With piLINK or the pi-lit app, deployed flare locations broadcast to navigation apps before drivers reach the scene.
Warning should solve more than visibility
pi-lit helps crews set up a warning line fast, shows drivers the path around the scene, and extends the warning beyond the flare line.
Crews are exposed while they set up in live traffic
Deploys in under 60 seconds. Runs 20+ hours. Set it once and stay out of the lane until the closure ends.
Every minute at a crash scene raises the risk of a second crash
The sequence reads as a moving arrow, so approaching drivers know which way to go from the moment the flares are down.
Drivers can’t see a scene over a hill or around a curve
Pair your flares with piLINK or the pi-lit app, and deployed flare locations can reach navigation apps before drivers arrive at the flare line.
The right power setup for how often you deploy
Both styles deliver the same sequential guidance. Choose based on deployment frequency and how your team manages power.
Professional Rechargeable
For agencies, fleets, and crews that deploy often and want a reusable system that stays organized and charged.
- 4, 6, or 10 flare sets
- Pairs with the pi-lit docking station
- Reusable power for repeat deployment
Commercial & Fleet Alkaline Battery
For drivers, backup vehicles, and teams that need portable emergency warning without a charging workflow.
- 4 or 6 flare sets
- Replaceable alkaline power
- A practical fit for backup vehicles and kits
Features & Specifications

- Power
- Rechargeable lithium-ion battery, rated for 1,500 full charge cycles
- Run time
- 20+ hours in the default wave pattern at normal brightness. Longer or shorter depending on flash pattern and brightness.
See run time by pattern
Run time by flash pattern, with the side LEDs on (the default) Pattern Normal brightness MAX brightness Wave (default) 21 h 10 h Rapid flash 33 h 15 h Strobe chase 23 h 11 h Wig-wag 60 h 30 h Simultaneous 14 h 6 h Steady burn 18 h 8 h Flares ship at normal brightness. MAX is a setting you turn on. Bench-tested at room temperature; cold weather shortens run time.
- Recharge time
- 6 hours from a completely depleted battery
- Charging
- Charge every flare at once in the dual-purpose carrying case
- Dimensions
- Overall dimensions for 6-Set and 10-Set Sequential Flares, and for both docking stations with flares docked.
Overall dimensions for Sequential Flare sets and docking stations, from the REV 07.2026 dimension drawings Configuration Height Length Width 10-Set Docking Station, with flares docked 9.63 in. (245 mm) 13.38 in. (340 mm) 3.63 in. (92 mm) 6-Set Docking Station, with flares docked 9.63 in. (245 mm) 9.25 in. (235 mm) 3.63 in. (92 mm) 10-Set Sequential Flares, without docking station 9.4 in. 11.9 in. 2.95 in. 6-Set Sequential Flares, without docking station 9.4 in. 8 in. 2.95 in. Mounting hardware for both docking stations: 1/4-20 x 3/4 in. Flat Head Socket Cap Screws. Official metric dimensions are published for docking stations only.
- Battery check
- Check battery status with the press of a button
- Rapid Deployment System (RDS™)
- Flares turn on automatically when lifted from the case. No buttons, so winter gloves are no problem.
- Automatic sync
- Flares synchronize on their own. No programming, no pre-numbering: turn on and deploy.
- Pair mode
- Synchronize a single set or several sets together
- Flash patterns
- 6 patterns: 4 sequential, 1 simultaneous, and 1 steady-burn
- Reverse sequence
- Reverse the sequence direction with a button press, so crews can deploy walking with or against traffic
- Gravity-controlled light
- A tilt sensor automatically aims the light output at approaching drivers
- Saved settings
- Preferred pattern, deployment order, tilt sensor, LED mode, and more are saved for the next deployment
Every set of sequential flares connects to pi-lit Cloud.
Your sequential flares connect to pi-lit Cloud through the pi-lit mobile app or a piLINK cellular gateway. Cloud access is included with every connected system.
- Live device status, with every connected device named by account and serial number
- Temporary traffic control alerts and events, logged the moment a deployment goes live
- Impact notifications when a connected device is struck or knocked down
- Reporting by date range for supervisors, directors and budget reviews
Charging & Mounting Accessories
Docking Station & Vehicle Mount
6-flare and 10-flare cradles that charge a full rechargeable set in the truck or at the station.
See Docking StationUniversal Traffic Cone Adapters
Fits 28 in and 36 in cones and triples wireless range by lifting the flare to eye level.
See Cone AdaptersBallasted Range-Extender Bases & Mounts
Weighted bases, barricade mounts, and magnetic hardware for highway and helipad deployments.
See AccessoriesReady to guide the way?
Configure a flare set online, or talk with our team if your agency needs a purchase order, tax-exempt purchase, or help choosing a system.
Washington and Oregon State Contract
Agencies in Washington and Oregon should contact pi-lit for current state-contract purchasing details. Our team can also quote volume pricing for your fleet.
Volume pricing
Call +1 (949) 415-9411 or use the contact form to request volume pricing for your agency.
Who uses the flares
Law enforcement, fire brigades, utility companies, road assistance services, municipalities, and Departments of Transportation.
OTS grant help
We can prepare product package quotes, justification letters, and product scope letters to support your OTS grant request.










