Covered by an FMCSA exemption for use on commercial motor vehicles in place of triangles and fusees.See the Smart Sequential Road Flares
Call Us: +1 (949) 415-9411
Department of Transportation

Safer tapers.Fewer intrusions.Every closure on the map.

Sequential lamps on the drums and barricades your crews already set guide drivers into the merge sooner. Compass start and end markers publish every closure to a USDOT WZDx feed and send upstream driver alerts, the most cost-effective way to put your closures on the map.

  • MUTCD & ITESpec Lamps
  • Made inthe USA
  • 2-YearWarranty
  • CompassUpstream driver alert
  • Compass start and end markers
  • Sequential lamps on the drums
  • Safer tapers
  • Every closure on the map

Trusted by DOTs including

  • Alaska DOT
  • Kansas DOT
  • Washington State DOT
  • Florida DOT
  • Caltrans

Built into the equipment your crews already deploy.

  1. 01

    Already on the truck

    The technology lives in the lamps, cones, flares, and markers crews already set out and agencies already specify.

  2. 02

    No extra sensor or training

    There is no dedicated sensor to place and nothing new for the crew to learn before the next closure.

  3. 03

    It actually gets used

    Because it rides on gear they already deploy, utilization stays high and the closure gets reported.

Watch it in action

See a sequential taper on a real closure

What a closure looks like with pi-lit

A sequential taper with impact alerts built in, Compass publishing a USDOT WZDx feed, then protection for the crash cushion in front of temporary jersey barriers and K-rail.

01Sequential taper

Guide the taper with lamps crews already deploy

Sequential Barricade and Cone-Top Lamps flash in order along the taper. Impact and tilt alerts are built into the lamps, so a strike or knockdown is reported without placing a separate sensor.

Explore Smart Work Zone Products
pi-lit Sequential Cone-Top Lamp
02Compass and USDOT WZDx

Publish the closure and warn drivers upstream

Set Compass markers at the start and end of the closure. pi-lit Cloud publishes a USDOT WZDx feed for 511 systems and traffic management centers, and sends upstream driver alerts to navigation platforms and connected vehicles, with no crew data entry.

Explore Compass
pi-lit Compass start and end marker
03Crash cushions on long-term closures

Protect the crash cushion in front of temporary jersey barriers and K-rail

On long-term closures, temporary crash cushions sit in front of temporary jersey barriers and K-rail. The Impact Detection System sends an SMS and email alert within 60 seconds of a strike, with the timestamp, GPS location, and G-force impact profile.

Explore Impact Detection System
Crash cushion impact alert in front of temporary barrier

How a closure gets on the map

Compass marks the start and the end. pi-lit Cloud publishes a USDOT WZDx feed and sends upstream driver alerts.

ACTIVE LANE CLOSURE · SEQUENTIAL TAPER & COMPASS GPS
OPEN THRU LANEACTIVE WORK AREAC1Compass Start Marker (C1)Upstream Type 3 · Heading 270° WL1L2L3L4L5L6L7Sequential Taper Lamps (L1 to L7)2.4 GHz Wave · Instant Strike AlertC2Compass End Marker (C2)End of Closure · WZDx Verified
WZDx v4.2 + API FEEDLIVE · SYNCED

pi-lit Cloud & WZDx Telemetry

Taper Sequence7 Lamps Synced (60 BPM)
Start / End BoundariesC1 & C2 Verified (270° W)
Taper Impact Status0 Strikes · Armed (3-Axis)
{
  "publisher": "pi-lit Cloud",
  "version": "4.2",
  "event_type": "closure",
  "start_marker": "Compass C1",
  "end_marker": "Compass C2",
  "taper_lamps": 7
}
Products

Recommended Products

View All Products
pi-lit Smart Work Zone Products studio lineup

Smart Work Zone Products

Connected sequential lamps with built-in impact alerts, Compass start and end markers, and Integrated Doppler radar on the barricades and drums crews already set.

Front and rear views of the pi-lit Compass start and end marker

Compass

GPS start and end marker for Type 3 barricades, drums, and signs. Publishes the closure to a USDOT WZDx feed and sends upstream driver alerts.

pi-lit Integrated Doppler Traffic Radar module

Integrated Doppler Traffic Radar

Doppler radar built into the same hardware, measuring approach speed and traffic volume along the taper.

pi-lit Impact Detection System gateway

Impact Detection System

Protects temporary crash cushions placed in front of temporary jersey barriers and K-rail on long-term closures, with SMS and email alerts within 60 seconds of a strike.

pi-lit piLINK Digital Alerting Gateway

piLINK Digital Alerting Gateway

Portable cellular gateway that geostamps the deployment and, with light bar integration, goes live when the fleet light bar comes on.

pi-lit Traditional Warning Lamps Type A/C, B, and D lineup

Traditional Warning Lamps

6V, D-cell alkaline, and solar Type A/C, Type B high-intensity, and Type D 360-degree barricade warning lamps (formerly Checkers and C&C).

All pi-lit products

View All Products

Explore every pi-lit roadway safety product for connected warning, sequential guidance, and impact telemetry.

Cooperative purchasing

Ready to quote on Sourcewell or PCA

7M+

piLINK digital driver alerts

SourcewellPCA Contract OD-447-26USDOT WZDx Ready
We quote Smart Work Zone Products against Sourcewell and the Purchasing Cooperative of America (PCA Contract OD-447-26) and accept tax-exempt government purchase orders.

Safer tapers and every closure on the map, on every crew.

Request a quote for sequential lamps, Compass markers, and Doppler radar.