Covered by an FMCSA exemption for use on commercial motor vehicles in place of triangles and fusees.See the Smart Sequential Road Flares
Call Us: +1 (949) 415-9411
Fire & Rescue

A sequential taper upstream of the blocking apparatus

Fire crews block with the engine or ladder and set static cones that approaching drivers struggle to read at night. pi-lit adds a self-synchronizing sequential LED taper laid upstream of that apparatus, Smarter Cones with knockdown alerts, and automatic upstream digital driver alerts.

  • 2-Year Warranty24/7 Support
  • Made inthe USA
  • Issued USpatents
Fire engine on scene at night with pi-lit sequential flares marking the lane.

Trusted by fire departments including

  • Palm Beach County Fire Rescue
  • Reno Fire Department
  • Thornton Fire Department
  • Fishers Fire Department
  • Travis County Fire Rescue
Watch it in action

Product videos

Engineered for High-Speed Extrications, Hazmat Scenes, and Night Med-Evacs

When your engine company is blocking two lanes of interstate traffic at 2 AM, your crew needs active visual guidance and upstream digital warning.

01Apparatus Blocking

Give drivers a taper they can read upstream of the block

The engine or ladder is the block, and static cones beside it are hard to read at night. Pull a 6-flare or 10-flare sequential kit from the apparatus compartment and lay a self-synchronizing LED taper upstream of the blocking apparatus. It is crush-rated to 30,000 lbs, with no flame or smoke, so it is not an ignition source at a fuel spill, EV incident, or dry median.

Explore Sequential Road Flares
pi-lit Smart Sequential Road Flares kit
02Rapid Helicopter Med-Evac LZ Marking

Mark a 100 ft x 100 ft landing zone and wind direction in visible green or NVG infrared

The Smart IR Med-Evac Landing Zone Kit links 4 corner flares and a 5th wind-direction flare that flash in unison or glow steady, in visible green for unaided eyes, 880 nm infrared for night-vision goggles, or both. Ballasted bases keep them from blowing away in rotor wash.

Explore IR Med-Evac LZ Kit
pi-lit Smart IR Med-Evac Landing Zone Kit 5-flare set
03Automatic Apparatus Digital Alerting

Warn approaching drivers in navigation apps when the engine's light bar comes on

With light bar integration, piLINK goes live when your engine, ladder, or ambulance light bar comes on, with no action from the crew. It sends a temporary traffic control alert through pi-lit Cloud to driver navigation platforms and connected vehicles upstream.

Explore piLINK Gateway
pi-lit piLINK Digital Alerting Gateway for fire apparatus

Built for Every Apparatus Compartment

From first-due engines and hazmat units to rural brush trucks and air-medical landing teams, pi-lit stays charged and ready in 12V or 120V docking stations.

Highway extrication & TIMs

Create a sequential lane taper upstream of your blocking engine that shows drivers where to move over.

Helicopter landing zones

5-flare visible green and NVG infrared LZ kit with ballasted bases and a fifth flare for wind direction.

Hazmat & EV battery incidents

Flame-free, weatherproof sequential flares with 20+ hours of wave run time.

Apparatus compartment charging

6-flare and 10-flare docking stations that fit fire apparatus compartments on 12V DC hardwire or 120V AC.

Verified Fire Chief Feedback & Cooperative Purchasing

Tested Under Full Firefighting Operations

7M+

piLINK digital driver alerts

Fire Apparatus TestedSourcewell & PCA OD-447-26
"They have been run over, dropped, beaten up, and put through all the tests of current firefighting operations and are still going strong."
From the Field
“Our department ordered these flares approximately 2 years ago and we couldn’t imagine not having them. If you are a fire department that responds to accident scenes or close roads often these are a must have! Very easy to use and very effective. We now have them on all our fire engines as well as command vehicles.”
Jonathan BeamLieutenant, Winchester Fire Department (KY)
Products

Recommended Products

View All Products
pi-lit Smart Sequential Road Flares 10-set kit

Smart Sequential Road Flare

Flame-free LED sequential flares, crush-rated to 30,000 lbs, in 6-flare and 10-flare kits for highway TIMs blocking and hazmat scenes.

pi-lit Smart IR Med-Evac Landing Zone Kit

IR Med-Evac Landing Zone Kit

5-flare landing zone kit with visible green and NVG infrared LEDs and ballasted bases that will not blow away in rotor wash.

pi-lit 6-flare and 10-flare docking stations, cone adapters, and mounts

Accessories, Charging & Mounts

6-flare and 10-flare docking stations for fire apparatus compartments (12V DC or 120V AC) plus cone adapters.

pi-lit piLINK Digital Alerting Gateway

piLINK Digital Alerting Gateway

With light bar integration, piLINK goes live when the apparatus light bar comes on and warns drivers in navigation apps.

pi-lit Smarter Cone sequential traffic cones

Smarter Cone

28-inch and 36-inch sequential traffic cones with 360-degree visibility and knockdown alerts for command posts and closures.

pi-lit Cloud and Digital Alerting Platform

pi-lit Cloud

Live battalion visibility across active roadway incidents, automated motorist alerting, and post-incident deployment logs.

All pi-lit products

View All Products

Explore every pi-lit roadway safety product for connected warning, sequential guidance, and impact telemetry.

Ubiquity through economy

Protect your firefighters on every highway blocking assignment.