Covered by an FMCSA exemption for use on commercial motor vehicles in place of triangles and fusees.See the Smart Sequential Road Flares
Call Us: +1 (949) 415-9411
Covered by an FMCSA exemption

Smart Sequential Road Flares

Synchronized sequential lights that remove driver confusion, slow traffic down sooner, and guide vehicles safely past your crew.

USAMade in the USA
FMCSAExemption through 2028
<60 secDeploy time
20+ hrsWave pattern run time
Why It Matters

Warning should do more than flash. It should guide.

A moving pattern of light points drivers exactly where to go, so they slow earlier, merge sooner, and give crews room to work.

Sequential guidance

Flares fire in sequence to form a moving arrow that drivers instinctively follow.

Resources

Product Videos

pi-lit builds smart safety devices that help crews warn earlier, guide drivers clearly, and monitor road assets from the cloud.

Key Benefits

Shop The Product

Fast setup

Turn them on and set them down; the flares link and sequence automatically in under 60 seconds.

Clear direction

A synchronized wave of light shows approaching drivers which lane to take before they reach your crew.

Built for the road

Weatherproof, crush-rated to 30,000 lbs, and built in the USA to survive heavy trucks and snowplows.

Reusable, not disposable

Rechargeable and alkaline kits run for years, replacing $30 plastic triangles and single-use flares.

Warns drivers ahead

With piLINK or the pi-lit app, deployed flare locations broadcast to navigation apps before drivers reach the scene.

Why pi-lit

Warning should solve more than visibility

pi-lit helps crews set up a warning line fast, shows drivers the path around the scene, and extends the warning beyond the flare line.

01

Crews are exposed while they set up in live traffic

#1 causeof on-duty deaths in law enforcement is traffic-related events, and #2 for fire-rescue agencies.
With pi-lit

Deploys in under 60 seconds. Runs 20+ hours. Set it once and stay out of the lane until the closure ends.

02

Every minute at a crash scene raises the risk of a second crash

13 to 21%higher odds of a secondary crash for every extra minute a short incident (under 10 minutes) lasts.
With pi-lit

The sequence reads as a moving arrow, so approaching drivers know which way to go from the moment the flares are down.

03

Drivers can’t see a scene over a hill or around a curve

645 ftis how far ahead a driver at 65 mph needs to see a hazard to stop in time. A hill or curve can hide a scene inside that distance.
With pi-lit

Pair your flares with piLINK or the pi-lit app, and deployed flare locations can reach navigation apps before drivers arrive at the flare line.

Choose Your System

The right power setup for how often you deploy

Both styles deliver the same sequential guidance. Choose based on deployment frequency and how your team manages power.

Best for regular deployment

Professional Rechargeable

For agencies, fleets, and crews that deploy often and want a reusable system that stays organized and charged.

  • 4, 6, or 10 flare sets
  • Pairs with the pi-lit docking station
  • Reusable power for repeat deployment
Configure Rechargeable
Best for intermittent deployment

Commercial & Fleet Alkaline Battery

For drivers, backup vehicles, and teams that need portable emergency warning without a charging workflow.

  • 4 or 6 flare sets
  • Replaceable alkaline power
  • A practical fit for backup vehicles and kits
Configure Battery
Professional Rechargeable

Features & Specifications

A 10-flare set of orange pi-lit Smart Sequential Road Flares docked in the charging carrying case.
Power
Rechargeable lithium-ion battery, rated for 1,500 full charge cycles
Run time
20+ hours in the default wave pattern at normal brightness. Longer or shorter depending on flash pattern and brightness.
See run time by pattern
Run time by flash pattern, with the side LEDs on (the default)
PatternNormal brightnessMAX brightness
Wave (default)21 h10 h
Rapid flash33 h15 h
Strobe chase23 h11 h
Wig-wag60 h30 h
Simultaneous14 h6 h
Steady burn18 h8 h

Flares ship at normal brightness. MAX is a setting you turn on. Bench-tested at room temperature; cold weather shortens run time.

Recharge time
6 hours from a completely depleted battery
Charging
Charge every flare at once in the dual-purpose carrying case
Dimensions
Overall dimensions for 6-Set and 10-Set Sequential Flares, and for both docking stations with flares docked.
Overall dimensions for Sequential Flare sets and docking stations, from the REV 07.2026 dimension drawings
ConfigurationHeightLengthWidth
10-Set Docking Station, with flares docked9.63 in. (245 mm)13.38 in. (340 mm)3.63 in. (92 mm)
6-Set Docking Station, with flares docked9.63 in. (245 mm)9.25 in. (235 mm)3.63 in. (92 mm)
10-Set Sequential Flares, without docking station9.4 in.11.9 in.2.95 in.
6-Set Sequential Flares, without docking station9.4 in.8 in.2.95 in.

Mounting hardware for both docking stations: 1/4-20 x 3/4 in. Flat Head Socket Cap Screws. Official metric dimensions are published for docking stations only.

Download dimension drawings (PDF)

Battery check
Check battery status with the press of a button
Rapid Deployment System (RDS™)
Flares turn on automatically when lifted from the case. No buttons, so winter gloves are no problem.
Automatic sync
Flares synchronize on their own. No programming, no pre-numbering: turn on and deploy.
Pair mode
Synchronize a single set or several sets together
Flash patterns
6 patterns: 4 sequential, 1 simultaneous, and 1 steady-burn
Reverse sequence
Reverse the sequence direction with a button press, so crews can deploy walking with or against traffic
Gravity-controlled light
A tilt sensor automatically aims the light output at approaching drivers
Saved settings
Preferred pattern, deployment order, tilt sensor, LED mode, and more are saved for the next deployment
pi-lit Cloud

Every set of sequential flares connects to pi-lit Cloud.

Your sequential flares connect to pi-lit Cloud through the pi-lit mobile app or a piLINK cellular gateway. Cloud access is included with every connected system.

  • Live device status, with every connected device named by account and serial number
  • Temporary traffic control alerts and events, logged the moment a deployment goes live
  • Impact notifications when a connected device is struck or knocked down
  • Reporting by date range for supervisors, directors and budget reviews

Ready to guide the way?

Configure a flare set online, or talk with our team if your agency needs a purchase order, tax-exempt purchase, or help choosing a system.

Agency Purchasing

Washington and Oregon State Contract

Agencies in Washington and Oregon should contact pi-lit for current state-contract purchasing details. Our team can also quote volume pricing for your fleet.

Volume pricing

Call +1 (949) 415-9411 or use the contact form to request volume pricing for your agency.

Who uses the flares

Law enforcement, fire brigades, utility companies, road assistance services, municipalities, and Departments of Transportation.

OTS grant help

We can prepare product package quotes, justification letters, and product scope letters to support your OTS grant request.