Covered by an FMCSA exemption for use on commercial motor vehicles in place of triangles and fusees.See the Smart Sequential Road Flares
Call Us: +1 (949) 415-9411
CHARGING CRADLES · CONE ADAPTERS · RANGE-EXTENDER BASES · HARDWARE

Accessories, Charging & Mounts

Keep every pi-lit kit charged in the truck, elevate Sequential Flares onto standard traffic cones and barricades, and lock down field hardware with purpose-built mounts and replacement power supplies.

Illustrated 10-Set Docking Station with orange Sequential Flares docked in the charging cradle
6 & 10-BayHeavy-Duty Charging & Storage Cradles
12V & 120VIn-Vehicle DC & Station Wall Charging
3x RangeElevated Cone Adapters & Ballasted Bases
Made in USAEngineered & Supported 24/7 in the US
CORE ACCESSORY FAMILIES

Charging cradles, cone adapters, and the hardware that keeps a kit in the field.

Shop Accessories
pi-lit 6-Flare and 10-Flare Docking Stations with rechargeable Sequential Road Flares

01 / Charging & Vehicle Storage

Docking Station & Carrying Cases (6-Flare & 10-Flare)

6-Flare Cradle · 10-Flare Cradle · 12V Vehicle / 120V AC Wall

Heavy-duty charging and storage cradles that mount to a patrol trunk, utility truck bed, fire apparatus compartment, or station wall. Charges an entire set of rechargeable Sequential Flares simultaneously so crews never roll out with a dead battery.

pi-lit Universal Traffic Cone Adapters and storage satchel

02 / Cone-Top Elevation

Universal Traffic Cone Adapters

Fits 28 in & 36 in Cones · 3x Wireless Range · Eye-Level Visibility

Retrofits standard 28-inch and 36-inch traffic cones to hold a pi-lit Sequential Flare or warning lamp at the top of the cone. Elevating the flare off the pavement triples point-to-point wireless radio range and raises the sequential light wave to driver eye level.

pi-lit Flare Bolt Adapter and barricade mounting hardware with Sequential Road Flares

03 / Barricade & Signage Mounting

Flare Bolt Adapter & Magnetic Mounts

Barricade Bolt Adapter · Neodymium Magnet Base · Quick-Release

Mount pi-lit Sequential Flares directly to Type 1, Type 2, and Type 3 barricades, vertical panels, temporary sign stands, or steel service-truck tailgates when you need elevated directional sequencing above roadway grade.

pi-lit Ballasted Range-Extender Bases with Sequential Road Flares

04 / Rotor-Wash & High-Wind Stability

Ballasted Range-Extender Bases

Weighted Rubber Footprint · Elevates Antenna · Highway & Helipad Rated

Heavy-duty ballasted bases that hold pi-lit Sequential Flares and IR Med-Evac pucks flat on the asphalt against semi-truck wake and helicopter rotor wash while elevating the internal radio antenna for extended mesh range.

pi-lit 120V AC Wall Charger and 12V DC Vehicle Charger

05 / Replacement Power Supplies

120V AC Wall & 12V DC Vehicle Chargers

120V AC Station Supply · 12V DC Cigarette / Hardwire · Smart Trickle Charge

Official replacement and spare power cords for pi-lit rechargeable flare cases and docking stations. Smart charge protection prevents overcharging so kits can stay plugged in 24/7 between calls.

pi-lit D-Bolt kit, security socket tool, switch pin, and IDS cable-barrier mount

06 / Barricade & Barrier Hardware

D-Bolt Kits, Security Sockets & IDS Cable-Barrier Mounts

Tamper-Resistant D-Bolts · Security Socket Tool · IDS Snap-On Cable Bracket

Replacement D-bolts, security drive sockets, and push-button switch pins for pi-lit barricade warning lamps, plus industrial VHB adhesive pads and snap-on brackets for attaching the Impact Detection System (IDS) to 3-cable and 4-cable median barriers.

FEATURED ACCESSORY · 6 & 10-FLARE DOCKING STATION

Charged in the truck. Grab-ready when the call comes in.

A Sequential Flare only helps if it is charged when the call comes in. Mount a 6-flare or 10-flare docking cradle in the patrol trunk, utility truck bed, fire apparatus compartment, or on the station wall so every rechargeable flare charges simultaneously between calls.

pi-lit Sequential Safety Flares charging in a patrol vehicle docking station

A full set, grab-ready

A 6-flare or 10-flare trunk or station cradle charges every rechargeable Sequential Flare at once and keeps the kit organized for the next call.

Buy Docking Station

Charges a Full Set Simultaneously

A 6-flare or 10-flare cradle charges every rechargeable Sequential Flare in the kit at once, so crews never roll out with a dead battery.

Triples Wireless Mesh Range

Lifting a flare off the pavement on a cone adapter or ballasted base takes point-to-point wireless range from about 100 ft to 300 ft and beyond.

Organized & Grab-Ready

Every flare sits in its bay in the patrol trunk, truck bed, apparatus compartment, or on the station wall, ready to grab.

Protects Battery Longevity

Smart trickle-charge protection lets a kit stay plugged in between calls without overcharging the cells.

Retrofits Existing Cones & Barricades

Adapters and mounts put Sequential Flares on the 28 in and 36 in cones and Type 1, Type 2, and Type 3 barricades you already own.

Docking station & accessory specifications

Features & Specifications

Illustrated 10-Set Docking Station with orange Sequential Flares docked in the charging cradle
Dimensions
Overall dimensions with flares docked, for the 6-Set and 10-Set Docking Stations.
Overall dimensions with flares docked, from the REV 07.2026 dimension drawings
ConfigurationHeightLengthWidth
10-Set Docking Station, with flares docked9.63 in. (245 mm)13.38 in. (340 mm)3.63 in. (92 mm)
6-Set Docking Station, with flares docked9.63 in. (245 mm)9.25 in. (235 mm)3.63 in. (92 mm)

Mounting hardware for both docking stations: 1/4-20 x 3/4 in. Flat Head Socket Cap Screws.

Download dimension drawings (PDF)

Docking station configurations
6-flare and 10-flare heavy-duty charging and storage cradles for a patrol trunk, utility truck bed, fire apparatus compartment, or station wall
Input power options
12V DC in-vehicle power (cigarette plug or hardwire) and 120V AC wall power, with smart trickle charge so a kit can stay plugged in between calls
Cone adapter compatibility
Universal adapters for standard 28 in and 36 in traffic cones. Elevating a Sequential Flare or warning lamp triples point-to-point wireless range and raises the light to driver eye level
Barricade & magnetic mounts
Flare bolt adapter for Type 1, Type 2, and Type 3 barricades, vertical panels, and temporary sign stands, plus a neodymium magnet base with quick-release for steel tailgates
Ballasted range-extender base
Weighted rubber footprint that holds Sequential Flares and IR Med-Evac pucks flat against truck wake and helicopter rotor wash while elevating the internal radio antenna
Barricade & IDS mounting hardware
Tamper-resistant D-bolts, security drive sockets, and push-button switch pins for barricade warning lamps, plus industrial VHB pads and snap-on brackets for the Impact Detection System on 3-cable and 4-cable median barriers
Resources

Product Videos

pi-lit builds smart safety devices that help crews warn earlier, guide drivers clearly, and monitor road assets from the cloud.

Keep every kit ready

Charge a full set in the truck, lift Sequential Flares onto the cones and barricades you already own, and keep spare chargers and mounting hardware on hand for the next call.

Shop Accessories