Covered by an FMCSA exemption for use on commercial motor vehicles in place of triangles and fusees.See the Smart Sequential Road Flares
Call Us: +1 (949) 415-9411
ROADSIDE ASSET MONITORING

Impact Detection System (IDS)

Most crash cushion, guardrail, and cable barrier hits go unreported because the driver leaves the scene. The pi-lit Impact Detection System mounts in two minutes and sends a text and email alert within 60 seconds of an impact, so your crew can respond while the vehicle is still on scene, recover repair costs from insurance, and restore protection before the next crash.

USAMade in the USA
<60 secSMS & email impact alert
4-yearBattery life with daily check-in
2-minTool-free VHB or cable mount
WHY IT MATTERS

When a crash cushion or barrier is hit, drivers rarely call it in.

Attenuators, end terminals, guardrails, and cable barriers are engineered to absorb one serious impact. When a motorist strikes one at 4:00 AM and drives away, that asset sits compromised until somebody finds it, and the maintenance contractor or agency absorbs the repair bill. IDS notifies your team within 60 seconds so you can dispatch immediately, document the strike for insurance cost recovery, and repair the asset before the next crash.

From Impact to Alert in Under 60 Seconds

An onboard 3-axis accelerometer detects the strike, logs the G-force profile, and sends an instant SMS and email alert with GPS coordinates and the asset's baseline photo.

CAUGHT ON CAMERA

Real impacts detected in the field.

Four highway impacts where drivers left the scene or crews would not have known the asset was compromised without an instant IDS alert.

REACT 350 Attenuator

7:15 AM Major Hit-and-Run on a Crash Cushion

A vehicle strikes a highway crash cushion head-on at 7:15 AM without braking, then drives away from the scene. IDS immediately alerted the maintenance crew with the timestamp, location, and G-force profile so the compromised attenuator could be inspected and restored.

I-235 Eastbound

4:00 AM Hit-and-Run Before Morning Rush Hour

At 4:00 AM, a driver strikes an attenuator, drives a mile down the highway, and waits for a tow truck without reporting the damaged barrier. The IDS alert notified maintenance immediately so the cushion was not left collapsed for morning traffic.

Keo Way Gore Point

Pinpointing the Right Cushion After an Embankment Crash

After a vehicle glanced off an upstream gore-point crash cushion and came to rest down the embankment near a second end terminal, on-scene responders inspected the wrong asset. The IDS alert provided ground truth on which cushion actually took the impact.

I-35 Corridor

High-Tension Cable Barrier Strike Detected 2,000+ Feet Away

Mounted more than 2,000 feet upstream near an overpass, a snap-on IDS cable sensor detected a strike that took down two critical sections of median cable barrier, alerting the DOT to repair the barrier before a cross-median collision could occur.

Key Benefits

Request a Quote

Alerts within 60 seconds

Sends an instant SMS and email alert with timestamp, GPS map location, G-force dynamics, and baseline deployment photo the moment an asset is struck.

Recover third-party repair costs

Fast notification lets contractors and agencies arrive while the vehicle is still on scene or match the exact strike time to highway cameras for insurance subrogation.

2-minute tool-free install

Mounts directly to crash cushions, end terminals, guardrails, and signs with industrial VHB adhesive, or snaps onto cable barriers with our dedicated cable mount.

4-year battery with daily check-in

Runs for four years on its internal battery, checks in every 24 hours so you know the sensor is alive, and sends configurable low-battery alerts.

Custom routing and G-force thresholds

Adjust impact sensitivity (2,500 milli-G default) remotely from the dashboard and route notifications by site to your maintenance crew, contractor, or DOT district.

BUILT FOR ASSET MANAGERS

Stop paying out of pocket for unreported hits.

Request a Quote

For Highway Maintenance Contractors

When your contract holds you responsible for maintaining crash cushions, guardrails, and cable barriers, every unreported drive-away comes out of your margin. IDS alerts your dispatch within 60 seconds of an impact so your crew can arrive while the vehicle and police are still on scene, recover repair costs from the at-fault driver's insurance, and meet strict contract repair SLAs.

For DOTs, Tollways & Asset Owners

Eliminate hundreds of miles of manual barrier patrols and never leave a collapsed attenuator or downed cable barrier sitting uninspected on your corridor. Every impact, daily health check-in, and G-force profile is time-stamped in pi-lit Cloud, giving your agency ground-truth location data, spare-parts tracking by manufacturer, and a defensible maintenance record.

Impact sensor specifications

Features & Specifications

Features

60-second alert delivery
Sends SMS and email notifications within 60 seconds of an impact, including timestamp, map location, and initial deployment photo.
2-minute tool-free mounting
Attaches directly to attenuators, guardrails, end terminals, and signs with industrial VHB adhesive, or snaps onto cable barriers with our dedicated cable mount.
Remote G-force & alert configuration
Adjust impact sensitivity (2,500 milli-G default) and configure who receives alerts per site directly from the desktop dashboard.
Daily health & battery check-ins
Reports health status every 24 hours (configurable), with automatic failure-to-check-in alerts and configurable low-battery alerts (25% default).
3-axis impact dynamics
Onboard 3-axis (X, Y, Z) accelerometer captures and graphs G-force profiles and impact dynamics for every event.
Asset & repair history
Stores manufacturer details, spare-parts requirements, baseline deployment photos, and full event history for every monitored site.

Specifications

Assets monitored
Crash cushions, end terminals, guardrails, cable barriers, gore and warning signs, railroad crossing gates, and barrels
Mounting
Industrial VHB adhesive (flat or curved steel and plastic) or dedicated snap-on cable barrier bracket; no drilling, putty, or modification of MASH hardware
Battery life
4 years on internal battery (with 24-hour check-in cadence)
Low-battery alert
25% default (customer-configurable in dashboard)
Accelerometer
3-axis (X, Y, Z), default threshold 2,500 milli-G (remotely adjustable in dashboard)
Cellular connectivity
AT&T LTE cellular network (with international roaming partners)
Local mesh capability
Built-in 2.4 GHz radio (up to 492 ft / 150 m line-of-sight) for optional multi-node sites
Check-in frequency
Every 24 hours by default (adjustable upon request)
Environmental rating
IP67 dust and water protection
Resources

Product Videos

pi-lit builds smart safety devices that help crews warn earlier, guide drivers clearly, and monitor road assets from the cloud.

Know the moment an asset is hit.

Whether you maintain crash cushions, guardrails, and cable barriers under a state contract or manage corridor infrastructure for a DOT or tollway, we can get pilot sensors deployed on your highest-hit locations in minutes.

Get a Demo