Contactor+
MAX
MAX GPS

Smart Sequential Cone-Top Lamp

For overnight temporary traffic control, cones are the go-to delineator in many states. A simple insert and you’re good to go with smart technology in a stone-age cone. Guide traffic away from your crew. Reduce confusion. Give drivers directional information. Drivers see the runway-like lamps marching in sequence and naturally follow their direction. University proven to improve driver compliance.

For volume pricing and information

Give us a call at +1 (949)415-9411 or fill out the form below.

Videos of Smart Flare Deployments

Improve safety

pi-lit’s® Sequential Cone-Top Lamps sit on top of a standard traffic cone. This raises the device 8 inches higher than the top of the cone, creating a more effective warning when compared to other lamps that mount lower on the outside of the cone. Perfect for short term incident management or maintenance activity, utility work, checkpoints, special events, and parking, the sequential cone-top lamps slides into the top of the cone for easy installation and set up.

  • Single button to turn on
  • Automatic synchronization (no programming or pre-numbering required)
  • Efficient lens design for increased brightness

Guidance today…autonomy tomorrow! At 70mph drivers should not have to guess. Sequential flashing lamps are really “Follow Me” lamps that provide guidance to traffic navigating lane changes, delineators, equipment and personnel.

FEATURES AND SPECIFICATIONS

Contactor+

pi-lit®’s Type B Lamp available in an 3V, 6V, and True Solar system
pi-lit®’s Type B Lamp made in the USA
Traffic cone with pi-lit®’s Type B Lamp
  • 45+ days of continuous flashing battery life

  • 2 off-the-shelf D Alkaline batteries

  • 2.4 Ghz Radio Communication (no programming necessary)

  • One channel frequency option (simple)

  • Kit Includes (Sold in sets of 6 or 10 lamps)

  • D-Cell Batteries Installed

  • Single button operation

  • Weight: 1.05 lbs (17 Ounces)

  • Kit includes: Sold in sets of 10 lamps (ship with batteries optional). 

Kit includes (Sold in sets of 6 or 10 lamps)

D-Cell Batteries Installed

FEATURES AND SPECIFICATIONS

MAX

pi-lit®’s Type B Lamp designed to the MUTCD and ITE Specifications
pi-lit®’s Type B Lamp is a High-Intensity 24 hour flashing warning lamp
pi-lit®’s Smart Sequential Cone-Top Lamps for traffic control
  • 45+ days of continuous flashing battery life
  • 2 off-the-shelf D Alkaline batteries
  • 2.4 Ghz Radio Communication (no programming necessary)
  • pi-lit work zone cloud connectivity capability (Impact and battery status alerts)
  • MAX brightness utilizing a high powered LED
  • Two channel frequency options (Channel 1 + Channel 3) 
  • Lens hood to block ambient light to enhance brightness and visibility 
  • Weight: 1.25 lbs (20 Ounces) 

  • Kit includes: Sold in sets of 10 lamps (ship with batteries optional).  

Kit includes (Sold in sets of 6 or 10 lamps)

D-Cell Batteries Installed, Hood on each lamp

FEATURES AND SPECIFICATIONS

MAX GPS

pi-lit®’s Type B Lamp designed to the MUTCD and ITE Specifications
pi-lit®’s Type B Lamp is a High-Intensity 24 hour flashing warning lamp
pi-lit®’s Smart Sequential Cone-Top Lamps
  • 45+ days of continuous flashing battery life
  • 2 off-the-shelf D Alkaline batteries
  • 2.4 Ghz Radio Communication (no programming necessary)
  • GPS Module provides Digital lane closures (Can be used as Work Zone Start/End Markers)
  • pi-lit work zone cloud connectivity
  • Impact and battery status alerts 
  • MAX brightness utilizing a high powered LED 
  • Two channel frequency options (Channel 1 + Channel 3)  
  • Lens hood to block ambient light to enhance brightness and visibility 
  • Weight: 1.25 lbs (20 Ounces)

Kit includes (Sold in sets of 6 or 10 lamps)

D-Cell Batteries Installed, Hood on each lamp, GPS module on each lamp

Additional Specifications

Verified

Meets MUTCD & ITE Specifications and
is NCHRP-350 approved.

Visibility

Mounts on top of traffic cones making it more
visible to oncoming motorist.

Universal

Mounts to most traditional traffic cones
with a hole in the top.

Give your cones more notice: Make then Active

You carry cones, why not use them properly. A passive cone reflects oncoming headlights, but provides no depth-of-field or guidance. The simple and low cost addition of sequential-flashing guidance lamps provides directional information for oncoming drivers and guides them around the incident or work area.

  • Automatic Synchronization
  • One button press is all that it takes
  • Mounts simply atop the cone providing an additional 8″ elevation for better viewing

Designed, Engineered, and Assembled in the U.S.A.

Road equipment needs to be built to last. Our patented rectangular design maximizes battery volume while minimizing height. Tire impact is lessened. Manufactured and designed in our facility in California, the smart flare has an anticipated life span of 5+ years. With 2-year warranty and 24/7 support, the pi-lit® team has your back.

  • Generation-2 flare – 50,000lbs (26,000 kg) of crush strength. Yup, you
    read that right!
  • IP67 Water and Dust Proof Rating
  • Built, Designed, and Supported in the U.S.A
  • 2-Year Manufacturer’s Warranty
Lamps Built in USA

Pi-Link ™ WZ Lamp-to-Cloud Safety Technology

Digital Groundtruth

pi-link™ brings digital alerts to public mapping systems such as Waze, Apple Maps, and traffic management centers. Using pi-lit®’s lamp mesh network, pi-link™ WZ (Work Zone) will automatically activate and alert mapping systems when the cone top lamp is turned on.  Drivers will be alerted via their navigation system miles ahead informing them of a lane closure, incident ahead, 1st-responders on the road, etc.

Key Features

  • Digital Alerts
    Advanced warning digital alerts
  • Fleet Reports
    Time/Date of Activation, duration, location reporting
  • Digital and Visual Alerts
    A combination of alerts to bring road professionals home safely each night. Choose between 9 literals: “Work zone ahead; Incident ahead: Right lane closed ahead: Police ahead:” You design and choose!
  • WZDx Compliant
    Automatically pull data into ITS and TMC systems; Geo-Tags by GPS start/end of the work zone
  • Automatic
    Activates when sequential lamps are turned on
  • Impact notification
    When cone is knocked over or blown over
  • No limit to number of lamps in a string
  • Multiple radio frequencies
    Available for deployment of tapers near to each other

For pricing and information

Give us a call at +1 (949)415-9411 or fill out the form below.
(Information will not be distributed; used only for pi-lit® to answer your questions).

pi-lit®’s Smart Sequential Cone-Top Lamps for traffic control