Add your deal, information or promotional text



  • Radio communication: 2.4 GHZ (ISM band)

  • 50+ feet (15 meters) range on ground

    • 1000+ feet (330 meters) range when placed on top of a cone

  • Built strong - can withstand 30,000 lbs static load

  • IP65 rated - Water, snow, dust resistant (can withstand any weather

  • 12 bright through-hole side LEDs, 4 bright surface mount
    top LEDs

  • 3000+ feet (1000 meter) visibility with 360-degree horizontal
    viewing angle and 180-degree vertical projection.

  • Available in a Rechargeable or Alkaline battery system

    • Rechargeable system is powered by Lithium Polymer
      7.4V, 1710 mAh (20-24 hrs continuous flash time)

    • Alkaline is powered by 4 off-the-shelf AA-Alkaline
      batteries (36-40 hrs continuous flash time)

  • No federal or state specification or approval needed to use


  • RDS (Rapid Deployment System). Turn on a Flare by simply removing
    from the case. No buttons needed. (Rechargeable version only)

  • Tilt sensor to detect the flare's orientation and flash out the top or
    from the side (energy saving feature).

    • Override this feature and place cones over the flares while they are flashing out the top LEDs. This will brightly illuminate the inside of your cones, making your cones a sequential warning!

  • Strong and durable magnetic base to allow mounting on vehicles, signs, cones, etc. Mounting flares on back of vehicle creates an effective/low cost
    temporary light bar.

  • Reverse sequence direction without resetting system (can be deployed
    in the reverse order).

  • 5 unique flash patterns to choose from (4 sequential, 1 simultaneous). (One flare will change/control patterns to all flares in string)

    • Pattern 1 = Single flare march

    • Pattern 2 = Two flare march

    • Pattern 3 = “Wave” pattern (tail off pattern)

    • Pattern 4 = Fast, single flare march (alerting)

    • Pattern 5 = Simultaneous pattern (tail on, tail off)